FEATURES：
- Calibration with Traceable Standard Rotor
- Balance Both Semi-finished Product and Final Product
- Set Tolerance According to ISO 1940
- Single, Dual and Static Plane Balancing
- Automatically Turn On and Off the Rotor
- Balance by Adding and Removing Mass
- Fast Check the problem with Spectrum Analyzer
- Auto Determine OK/NG
- USB Plug and Play Connectivity
- Low Consumables / Low Cost / High Efficiency
- Graphical Radar Map
- Traceable standard rotor makes machine verification convenient.
- Set tolerance according to international standard, ISO1940.
- Support balancing final products directly.
- Support balancing semi-final products by loading workpiece on a stator.
- Simply find the vibration source by spectrum analyzer.
- Flexibly Apply for Adding and Removing Mass Balancing.
- Automatically Turn On and Off the Rotor.
- Produce flexibly and conveniently with Single, Dual, and Statistic Radar Map.
- Prevent from manual mistake by Determining OK/NG Automatically.
- Operators read the unbalance directly with graphical radar map.
- Directly operate with guided interface and without training.
- Use standard rotor to stay on top of balancing machine status at any time.
- Standard rotor is the best tool for convenient in-house machine verification.
- The optical tachometer makes user adjust the position easily.
- Only click once and then complete the adjusting of tachometer amplifier.
- Be applicable for semi-finished and final product with the multifunctional design.
- Be applicable for 1 - 12 cm diameter workpiece.
- Automatically position to the reflective point with cylinder.
- Operators read the unbalance directly with graphical radar map.
- Directly Operate with guided interface and without training.
- Manufacture decentralized with Chinese and English UI.
- Produce flexibly and conveniently with Single, Dual, and Statistic Radar Map.
| Advantage Characteristics | |||||
| Balancing Type | Single / Dual / Static | Units | ug/mg/g/kg | ||
| Display Type | Radar Diagram | Auto Turn On/Off the Rotor | Yes | ||
| Language | Traditional Chinese / Simplified Chinese / English | Clay Hint | Yes | ||
| Operating System | Win7/8/10 | Components | Yes | ||
| Auto Determine OK/NG | Yes | Verification with Standard Rotor | Yes | ||
| Background Noise Detect | Yes | Add / Remove Mass to Balance | Yes | ||
| Auto Return to Origin | Yes | ISO 1940 Calculator | Yes | ||
| Spectrum Analyzer | Yes | Export as Excel Format | Yes | ||
| File Management of Parameters | Yes | Online Database | Yes | ||
| RS232 Output | (option) | Vibrations of Radial / Axial Direction | Yes | ||
| Productivity Statistics | Yes | Last Radar Diagram | Yes | ||
| Hardware Specifications | |
| Suitable fan size (work-piece) | 1.0 CM – 12.0 CM |
| Type of unbalance detection | Single/dual/triple planes measurement |
| Maximal fan weight (work-piece) | < 150.0 gram |
| Maximum measuring speed | 2,000 - 20,000 (rev/min, RPM) |
| Resolution of rotating speed | < 2% |
| RPM sensor head positioning | Cylinder control |
| Rotating phase detector | Photo detector |
| Controller connection type | USB 3.0 Plug and Play |
| External communication interface | RS232 (option) |
| Mechanical size (L x W x H) | 350.0 x 250.0 x 300.0 (mm) |
| Weight of balancing machine | < 12.5 Kg |
| Power requirement | 200 - 220V (Single phase , 50 or 60Hz) |
| Air source pressure requirement | 5.0 – 6.0 Kg/cm^2 |
| Environmental temperature | 10 – 60 degree C |
| Environmental humidity | 25% - 80% |
Note : the value depends on fan size.
※Changes of appearance and specifications are subject to change without notice
※Changes of appearance and specifications are subject to change without notice